Enviro Shine - Septic-Safe Automatic Dishwasher Powder Concentrate | Eco-Friendly & Chlorine-Free

Items such as aluminium, lead crystal, hand-painted china, decorated glassware and some plastic ware are not intended for automatic dishwasher use.

Automatic dishwashing machine

1. a. Regular dishwashers: 35g to 50g of Enviro Shine per load. Use more product for heavily soiled items or in very hard water areas. Fill the detergent dispenser as required by the dishwasher manufacturer.
   b. Commercial dishwashers: For an average single-tank commercial dishwashing machine, add 1 cup (that’s approximately 200g) of Enviro Shine before your first operation of the machine. Then add approximately 30g of Enviro Shine to the main wash tank after each wash. Alternatively, place 1 cup of Enviro Shine under the rack and replace when only a 1⁄2 cupful remains.
2. Wear gloves. Wearing an apron is also recommended.
3. Scrape, soak and sort dishes. Scrape food and debris into the bin. If heavily soiled, soak separately before washing.
4. Stack and pre-rinse dishes. Stack dirty items into racks as recommended by the manufacturer. Rack dishes on edge, face up and leaning back. Place cups and glasses face downwards. Place cutlery in baskets, handles down.
   *Optional pre-rinse: Spray/hose off dirty items prior to placing the rack in the machine. Pre-rinsing loosens dried on deposits and helps keep the wash water cleaner for longer which means cleaner dishes every time.
5. Add detergent, place racks and start the machine. Follow the machine manufacturer’s instructions.
6. Remove clean items and put them away. Wash hands and gloves before removing clean items. Beware: Items can be very hot when removing them from the machine. 
7. At the end of the wash period clean the machine inside and out then turn off the machine, turn off heaters and open drain valves. Leave open to air dry.

Manual pre-soak

Enviro Shine is also a fantastic manual soaker for greasy pots and pans, cutlery, crockery and cups, or for hand washing beer glasses. Add ¼ to ½ a cup to a sink or bucket full of hot water and allow items to soak for a ½ hour or more if necessary. Ensure suitable gloves are always worn. Rinse off with hot water before allowing it to dry.

Handy tips

• For the best results use in conjunction with Spotless rinse aid.
• Regularly check that the ware washing machine's temperature settings are correct. Prewash 42°C to 50°C, Wash 60°C to 72°C, Power Rinse 72°C to 78°C and Final Rinse 82°C to 88°C.
• Regularly check for obstructions in the wash and rinse nozzles.
• Regularly remove and clean curtains, wash arms, rinse arms and scrap trays.
• Keep the machine free of scale buildup by using Descale Clean and Clear.
• Replace the lid on the container immediately after use.
• For larger machines or where a dispenser is used please consult a technical specialist for advice.
• Always test first in an inconspicuous area before using any cleaning solution. Play it safe, especially when you use a product for the first time. Some surfaces can be sensitive to moisture and particular chemical types.

Is Enviro Shine septic-safe?

Yes. It's septic-safe, grey-water safe, 100% readily biodegradable and it breaks down into nutrients that are safe for the garden.

Does Enviro Shine contain chlorine?

No. It contains no harsh caustic or chlorine chemicals.

What makes Enviro Shine clean without chlorine?

A peroxy salt generates hydrogen peroxide, which acts as an active oxygen bleach and stain remover.

How much Enviro Shine do I use in a regular domestic dishwasher?

35g to 50g per load. Use more for heavily soiled items or in very hard water areas. Fill the detergent dispenser as the dishwasher manufacturer requires.

How much Enviro Shine do I use in a commercial dishwasher?

For an average single-tank commercial machine:

• Add 1 cup (about 200g) before the first operation.
• Add about 30g to the main wash tank after each wash.

You can also place 1 cup under the rack and replace it when only half a cupful remains.

Can I use Enviro Shine to pre-soak?

Yes.

1. Add a quarter to half a cup to a sink or bucket full of hot water.
2. Soak for half an hour or more if needed. Wear suitable gloves.
3. Rinse off with hot water before drying.

It's a sensational kitchen presoak, fantastic on pots, pans, cutlery and beer glasses.

What shouldn't I wash in the dishwasher machine?

Aluminium, lead crystal, hand-painted china, decorated glassware and some plastic ware.

What machines can I use Enviro Shine in?

Domestic and commercial automatic dishwashers. It's ideally suited to single-cycle and conveyor/tunnel-type dishwashers. 

Do I need a rinse aid?

For the best results, use it with Spotless rinse aid.

What wash temperatures should I use?

Regularly check the machine's temperature settings:

• Prewash: 42°C to 50°C.
• Wash: 60°C to 72°C.
• Power rinse: 72°C to 78°C.
• Final rinse: 82°C to 88°C.

How do I keep the machine free of scale?

Use Descale Clean and Clear, and regularly remove and clean curtains, wash arms, rinse arms and scrap trays.

What's the fragrance in Enviro Shine?

Lavender and eucalyptus essential oils.

Do I need to wear gloves?

Yes. Always wear gloves. An apron is also recommended.

Is Chlor Guard best kept in an air tight container?

Yes. Replace the lid on the container straight after use.

Does Enviro Shine sanitise?

Yes. It whitens, brightens, destains and sanitises. A peroxy salt generates hydrogen peroxide as an active oxygen bleach, stain remover, deodoriser and sanitiser.

Is Enviro Shine safe?

Yes. It's safe and easy to use, with no poisons and no known allergens.

Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.

Safety Data Sheet

• Safety Data Sheet (SDS): Enviro Shine

Wall Charts

• XO2 Chemical Handling Guide - A4 Wall Chart

Related Articles

• 21 Cleaning Chemical Handling Guidelines For Your Workplace

Calculators

• The Facility Cleaning + Hygiene Score