Specifications for Brush & Flush - Thick Toilet Bowl & Urinal Cleaner & Stain Remover
|
Size
|
750ml
or
5L
or
15L Drum
|
I'll do the dirty work for you.
Brush & Flush is a professional toilet bowl and urinal cleaner that cleans, removes odours, and removes stains in one quick and easy step. It's brilliant for removing poop, rust, soap scum, algae slime, mildew, body fats and oils, hard water carbonate deposits, dirt, common soils, uric acid deposits and most stains. The thickened formula delivers improved ‘cling’, resulting in better overall cleaning performance. There is no heavy scrubbing required to leave your toilet bowls and urinals sparkling clean with a fresh lavender fragrance.
Who loves Brush & Flush?
Brush & Flush is loved by professional cleaners, facility maintenance departments, hotels, schools, universities, child care centres, office buildings, councils, aged care centres, casinos, resorts, apartments, motels, holiday parks, gyms, workplaces, shopping centres, and homeowners.
The benefits
• Cleans. Remove odours. Removes stains.
• Thickened formula with improved 'cling'.
• Eliminates bad odours fast.
• Removes tough stains and encrustations.
• Safe on stainless steel, plastic, glass & porcelain.
• No heavy scrubbing required.
• Fresh lavender fragrance.
• Sanitises surfaces.
• Safety blue dye added so you know where you have applied it, and also for a nice residual colour to impress your clients.
• Septic safe.
• Eco-friendly. Biodegradable.
• Australian made and owned.
• 100% cruelty free and never tested on animals.
Brush & Flush is ready to use. Do not dilute. Do not use on marble, natural stone or any other acid sensitive surface. Always use in the XO2 Brush & Flush labelled bottle.
Toilet bowl and urinal cleaning
1. The toilet bowl or urinal should be flushed to ensure all surfaces are wet.
2. Apply to the surfaces of the toilet bowl or urinal by scourer, brush or squirt bottle.
3. Evenly spread the solution over the surface to be cleaned.
4. Allow 5 to 10 minutes contact time before you brush or scour and finally flush with clean water.
Handy tips
• If you wish to stop a toilet or urinal automatic flusher from working while you're cleaning, cover the sensor temporarily with some opaque tape. Remember to remove it when finished.
• Always test in an inconspicuous area before using any cleaning solution on a surface for the first time. Some surfaces can be sensitive to moisture and particular chemical types.
• Always rinse the product off the surface thoroughly and never let it dry on a surface.
• Being acidic in nature and super high performance, ensure you do not allow the product to drip or splash onto surrounding surfaces.
• Do not use on marble, natural stone or any other acid sensitive surface.
Is Brush & Flush safe on septic systems?
Yes. It's septic-safe.
Is Brush & Flush pet-friendly?
Once you have finished the Brush & Flush cleaning process, it is safe for pets to hang around again.
Is Brush & Flush safe for the environment?
Yes. It's eco-friendly and biodegradable.
Do I need to dilute Brush & Flush?
No. It's ready to use. Do not dilute.
Can I use Brush & Flush on marble or natural stone?
No. It's acidic, so don't use it on marble, natural stone or any other acid-sensitive surface.
How long should I leave Brush & Flush on?
Allow 5 to 10 minutes of contact time before you brush or scour, then flush with clean water.
What does Brush & Flush remove?
Rust, soap scum, algae slime, mildew, body fats and oils, hard water carbonate deposits, dirt, common soils, uric acid deposits and most stains.
Why is Brush & Flush blue?
Safety blue dye is added so you know where you've applied it.
What if the toilet or urinal has an automatic flusher?
Cover the sensor temporarily with some opaque tape while you clean. Remember to remove it when you're finished.
Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.
Safety Data Sheet
Wall Charts
Related Articles
Calculators
