Specifications for iDestroy - Mould Remover & Preventative Treatment
|
Size
|
1L
or
5L
or
15L Drum
|
Break the mould. Keep it from coming back.
iDestroy is XO2's ready-to-use mould remover and preventative treatment. It removes mould, algae, moss and mildew fast from indoor and outdoor hard surfaces. And it helps to stop them coming back. How you might ask? The residual product continues to work after application. Just apply and leave... done!
The iDestroy formulation is revolutionary and draws on over 50 years of research and development. Let all of our hard yards work for you xo
Why You'll Love It
- Removes mould fast - mould, algae, moss, mildew and green slime, with immediate results.
- Residual protection - the product left on the surface keeps working, helping prevent mould coming back.
- 'Apply and leave' - no scrubbing or rinsing is required.
- Indoors and outdoors - from painted plaster walls and ceilings to concrete, pavers, roof tiles and tennis courts.
- Stains and odours go too - it removes staining, odours and soiling, and it's a powerful sanitiser and odour remover.
- Built-in corrosion inhibitor.
- Super easy to use - the results are immediate and amazing.
- Aussie made and owned.
Best For...
- Mould, algae, moss, mildew and green slime on hard surfaces
- Roofs, pavers, concrete, brick and stone walls
- Synthetic grass and hard court tennis courts
- Painted plaster walls and ceilings, tiles and grout
- Leaving a preventative mould treatment behind with a second coat
Industries:
- Professional Cleaners
- Property & Facility Managers
- Roof & Exterior Cleaning Contractors
- Tennis Clubs & Sporting Facilities
- Homeowners
Where You Can Use It
Areas:
Indoor and outdoor hard surfaces including pathways, building exteriors, driveways, tiled areas, roofs, fences, bathrooms and sporting courts.
Surfaces:
Painted plaster walls and ceilings, concrete, pavers, stone, Colorbond, stencil/stamped concrete, roof tiles, hard court tennis courts, synthetic grass, tiles, terracotta, bricks, sandstone and granite.
Important: Do not use on carpet, rugs, upholstery, clothing, curtains, canvas, cushions or any other textile. Not for use on pets, and don't let it go into a septic system. Always test in an inconspicuous area first, and wear a suitable respirator or face mask if you spray it in an area with low or poor ventilation.
Is iDestroy Right For Me?
Choose iDestroy if you want:
- Mould, algae, moss and mildew removed from indoor and outdoor hard surfaces
- An apply-and-leave product with no scrubbing or rinsing
- Residual protection to help stop mould coming back
- A ready-to-use product with no mixing
- Up to 50m² of coverage per litre on smooth, non-porous surfaces when sprayed on
Choose another XO2 product if:
- You want a pure sodium hypochlorite concentrate to dilute yourself > Hypo (Concentrated Sodium Hypochlorite, Chlorinated Destainer, Cleaner & Sanitiser)
- You need an all-purpose bleach and disinfectant > Power Bleach (All-Purpose Liquid Bleach & Disinfectant)
- You want a bleach-free shower and bathroom cleaner > Bravo (Eco-Friendly Professional Shower & Bathroom Cleaner Concentrate – Bleach Free)
- You want a bleach-based bathroom cleaner concentrate > Wonder Gel (Bleach-Based Professional Bathroom Cleaner Concentrate with Eucalyptus)
What Makes It Different?
- Residual Mould Prevention - leave the product on the surface and it keeps working. A second coat gives the best preventative treatment.
- More Than Just Bleach - mould inhibitors, surfactants, wetting agents and a corrosion inhibitor sit alongside some bleach for destaining, odour control and sanitising.
- Indoor and Outdoor - hard surfaces from roofs and walls to tennis courts.
- Easy Apply and Leave - spray, pour or broom it on, then walk away.
- Amazing Formulation - draws on over 50 years of research and development.
- Australian Made and Owned Since 1968 - a family business that answers the phone.
Specifications
Format: Ready-to-use
Pack Sizes: 1L, 5L and 15L drum (1000L by request)
Key ingredients: Sodium hypochlorite, potassium hydroxide, sodium hydroxide, a mould inhibitor (proprietary blend), a surfactant blend (proprietary), a wetting agent, corrosion inhibitor(s) and demineralised water.
Dangerous Goods Class: Non-DG (Not Dangerous Goods)
Coverage: Approximately 12m² per litre on rough, grouted, porous surfaces (pour and brush) and 50m² per litre on smooth, non-porous surfaces (spray on)
iDestroy is ready to use. Do not dilute.
Fast, easy ‘Apply & Leave’ application
- Blow, broom, or vacuum any dust, dirt, or debris from the surface.
- Apply when the surface is dry.
- Avoid direct sunlight. Work in a cool, preferably shaded area.
- Apply to the surface with a sprayer or watering can, or pour it on, then spread it around for even coverage with a soft-bristled broom or window washer.
- If necessary, hose the area after to remove any heavy surface debris and grime that was trapped by the mould and lightly apply and leave a second coat.
- Leave the product on the cleaned surface and it gives you residual mould prevention. A second coat gives the best preventative treatment.
Important: When using a sprayer to apply iDestroy, wear a suitable respirator/face mask. Avoid spraying or misting in areas with low or poor ventilation.
Coverage
Coverage is heavily dependent upon the texture and porosity of the surface as well as your application method. The estimated coverage for a rough, grouted, porous surface via the pour and brush method is approximately 12m² per litre. The estimated coverage for a smooth, non-porous surface via the spray-on method is 50m² per litre.
Handy tips
Always test in an inconspicuous area before using any cleaning solution on a surface for the first time. Some surfaces can be sensitive to moisture and particular chemical types.
Synthetic grass tennis courts:
When treating a synthetic grass tennis court begin at the highest point. Work in sections about the full width of the court by about 2 metres long, and pour or spray the product on top of the surface. iDestroy will begin to work immediately and will be pulled down through the carpet and sand, completely cleaning it. Heavily affected areas may require some scrubbing with a stiff-bristled broom. Continue this procedure for the full length of the court.
Roofing:
Pre-clean the area to be treated. Wre recommend applying to an area of approximately 2 metres wide and the full height of the roof, and spray the product on liberally starting from the top and working down. Due to rapid runoff, second applications are often required. Some scrubbing with a stiff bristle broom may also be required. If necessary, hose thoroughly, removing all trapped dirt and grime to complete the cleaning process. Ensure all downpipes are disconnected or blocked to prevent any runoff pollution from entering the stormwater system.
Brick, concrete, and stone walls:
Apply the product in the same way as above for roofing. Trouble spots may require a second application. Hose the wall down well to complete. iDestroy will not harm plants provided the plants are hosed down well should they come into contact with the product.
Is iDestroy just bleach or chlorine?
Definitely not. If you are after just bleach or chlorine, we manufacture and supply both of those products. They are very basic chemistry. iDestroy does contain some bleach within the formulation to assist with destaining, odour control and sanitising. iDestroy contains an innovative blend of ingredients to give you the very best performance on mould including mould inhibitors, surfactants, wetting agents, corrosion inhibitors and a few other cool tricks we’ve learnt over the 50 years of research and development.
Still don’t believe us? Give the iDestroy bottle a shake. See how it foams? Then give some bleach or chlorine a shake and see the difference :) It’s definitely not just bleach. Check out the SDS too and compare it. Use it, compare it, and be prepared to be amazed.
Is iDestroy classed as 'Dangerous Goods'?
No, iDestroy is not classed as Dangerous Goods. However, to ensure safety, always follow the directions on the label and safety data sheet.
Is iDestroy pet-friendly?
Don’t use it on pets. Treated surfaces are safe for humans and pets to touch once the product has completely dried.
Is iDestroy septic safe?
No, don’t let it go into your septic system as it will kill the good bacteria.
Is iDestroy safe on carpets, upholstery and canvas?
No, it is not safe to use on any textiles including your carpet, rugs, upholstery, clothing, curtains, canvas, cushions etc.
Is iDestroy safe to use in a sprayer?
iDestroy may damage some types of spraying equipment. Check with the sprayer manufacturer for the suitability of the product in their sprayer before using it. The sprayer must be able to handle highly alkaline liquids and chlorine. Wear a suitable respirator or face mask when spraying, and avoid spraying in areas with low or poor ventilation.
What is the ingredients list for iDestroy?
The exact iDestroy formula is a trade secret, but here’s what we can tell you. We can say that it contains sodium hypochlorite, potassium hydroxide, sodium hydroxide, a mould inhibitor (proprietary blend), a surfactant blend (proprietary), a wetting agent, corrosion inhibitor(s) and demineralised water. The SDS (Safety Data Sheet) has the full ingredient information and percentages.
Do I have to scrub or rinse after applying iDestroy?
No scrubbing or rinsing is required. If needed, hose the area afterwards to remove heavy debris and grime trapped by the mould, then lightly apply a second coat and leave it. Heavily affected areas, such as synthetic grass tennis courts, may need some scrubbing with a stiff bristle broom.
How far does one litre of iDestroy go?
Coverage depends on the texture and porosity of the surface and how you apply it. Expect about 12m² per litre on a rough, grouted, porous surface using the pour and brush method, and about 50m² per litre on a smooth, non-porous surface using the spray-on method.
Will iDestroy harm my plants?
iDestroy won’t harm plants as long as you immediately hose them down well if they come into contact with it.
Can I use iDestroy on a roof?
Yes. Spray it on liberally, starting from the top and working down. A second application is often needed because of rapid runoff. Disconnect or block all downpipes so runoff can't enter the stormwater system.
Is iDestroy easy to use?
Yes. It's super easy to use and the results are amazing. Apply it, leave it and walk away.
Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.
Safety Data Sheet
Wall Charts
Videos
Selection Guides
Related Articles
Calculators
