Specifications for Too Easy - Super Heavy-Duty Multi-Purpose Cleaner & Degreaser Concentrate
|
Size
|
1L
or
5L
or
15L Drum
|
Grease Gone. Grime Gone. Too Easy.
Too Easy is XO2's super heavy-duty cleaner and degreaser for lifting fat, grease, soot and built-up grime off hard surfaces and cutting back water-based floor sealer. It is a concentrated, multi-surface formula that is safe, easy to use and needs very little scrubbing.
Why You'll Love It
- Dissolves built-up grime and grease - fat, animal and vegetable oils, carbon, soot, dried blood and permanent marker.
- Very little scrubbing - a unique blend of wetting and emulsifying agents penetrates tough soils.
- Safer than solvents - non-flammable and water-based, so no smelly degreasers or flammable liquids.
- Low foaming - easier to use and easier to rinse.
- Economical - a super concentrate that reduces costs.
- Pleasant pine fragrance - a clean smell when the job is done.
- Australian-made and owned.
Good To Know
- Too Easy is brilliant on a multitude of different surfaces.
- Too Easy is harmless to painted surfaces, plastic and vinyl at the correct dilution.
- Always test first in an inconspicuous area.
- For floor sealer cut-backs, Too Easy works on water-based sealers only and will not strip or cut back solvent, epoxy and some other sealers.
Best For...
- Greasy kitchen floors, benches and walls
- Tile and grout deep cleaning
- Floor sealer cutbacks (water-based sealers only)
- Pressure washing outdoor furniture, roofs and shade sails
- Vehicle, boat and machinery washing
- Parts and engine degreasing
Industries:
- Hospitality (kitchens, bars and pubs)
- Professional Cleaners
- Automotive & Marine
- Agriculture & Machinery
- Crematoriums & Mortuary Facilities
Where You Can Use It
Areas:
Floors, tiles, benches, walls, ceilings, kitchens, bars, pubs, BBQ areas, bathrooms, toilets, showers, bathtubs, spa and pool edges, cars, trucks, boats, tractors, motorcycles, aircraft, parts and engines, roofs, shade sails and outdoor furniture.
Surfaces:
Marble, limestone, terrazzo, granite, sandstone, slate, concrete, pavers and other natural stone. Ceramic, vitrified and porcelain tiles (and grout). Non-slip floors, vinyl, sealed wood and timber. Painted surfaces, stainless steel, aluminium, chrome and other reactive metals. Parts, engines and machinery. Golf ball washing devices and most washable surfaces.
Is Too Easy Right For Me?
Choose Too Easy if you want:
- A heavy-duty degreaser that stays water-based and non-flammable
- One concentrate for floors, tiles, kitchens, vehicles and machinery
- Low foam for mopping, pressure washing and tile and grout work
- Deep cleaning power without the scrubbing
- A septic-safe, biodegradable cleaner
Choose another XO2 product if:
- You want a pH-neutral, everyday heavy-duty cleaner and degreaser > Bonza (Heavy-Duty All-Purpose Cleaner & Degreaser Concentrate)
- You want a streak-free finish for daily mopping and wiping > Bobby Dazzler (For Mopping Floors & Wiping Surfaces)
- You need a a food-grade degreaser built for greasy kitchen floors > Razzle Dazzle (Extra Heavy-Duty Kitchen Degreaser Concentrate)
- You need to strip water-based floor sealer completely > Naughty & Nice (Non-Caustic Floor Stripper for Removing Water-Based Sealers)
What Makes It Different?
- Water-Based, Non-Flammable Degreasing - a safe alternative to flammable solvent-based cleaners and smelly degreasers.
- Penetrates Tough Soils - a unique blend of wetting and emulsifying agents gets into fat, oil, carbon and soot.
- Safe on Reactive Metals - harmless to painted surfaces, plastic and vinyl at the correct dilution.
- One Concentrate, Many Jobs - mop, spray and wipe, pressure wash, tile and grout deep clean or cut back sealer.
- Made With the Environment in Mind - septic-safe, biodegradable, 100% cruelty-free and never tested on animals.
- Australian Made and Owned Since 1968 - made locally by a family business, with fast, no-nonsense help on the phone.
How Far Does It Go?
At 9:1
- 1L makes 10L of ready-to-use solution (that's 20 x 500ml bottles or 13 x 750ml bottles)
- 5L makes 50L of ready-to-use solution (that's 100 x 500ml bottles or 66 x 750ml bottles)
- 15L makes 150L of ready-to-use solution (that's 300 x 500ml bottles or 200 x 750ml bottles)
At 80:1
1L makes 81L of ready-to-use floor mopping solution
5L makes 405L of ready-to-use floor mopping solution
15L makes 1,215L of ready-to-use floor mopping solution
> Visit the XO2 Chemical Cost Calculator here
Specifications
Format: Concentrate
Fragrance: Pine
Formula: Water-based, low foaming
Flammability: Non-flammable
Septic-Safe: Yes
Biodegradable: Yes
Shelf Life: Refer to SDS (typical XO2 range: 2 years)
Dangerous Goods Class: Non-DG (Not Dangerous Goods)
Multi-purpose cleaner and degreaser (bottle use)
- Dilute at 9:1 (9 parts water and 1 part Too Easy). That's approximately 90% water and 10% Too Easy (75ml of Too Easy in a 750ml bottle). Add water to your bottle, then add Too Easy. Always use the XO2 Too Easy labelled product bottle.
- Apply directly onto a microfibre cloth, disposable wipe or the surface.
- Wipe the surface in a circular motion.
- Turn the cloth or wipe to an unused section (or use a fresh one) for a final wipe.
Floor mopping (mop and bucket use)
- Erect safety signs and prepare your gear.
- Dilute at 80:1 (80 parts water and 1 part Too Easy). That's approximately 99% water and 1% Too Easy (50ml of Too Easy in ½ a bucket/4 litres of water or 13ml per litre). Add water to your bucket, then add Too Easy.
- Fill up your bucket to the fill line through a dilution control system (or manually).
- Immerse the mop into the bucket. Soak. Then wring the mop out in a twisting motion.
- Replace your mop water regularly or as soon as it starts getting dirty.
Deep cleaning (bottle and bucket use)
- Dilute at 4:1 (4 parts water and 1 part Too Easy). That's approximately 80% water and 20% Too Easy (150ml of Too Easy in a 750ml bottle). Add water to your bottle, then add Too Easy.
- Apply the diluted product to the surface. Allow for 5 to 10 minutes of dwell time.
- Agitate with a suitable scourer, brush or high-pressure water.
- Rinse with water.
- Pick up excess moisture and allow it to dry.
Tile and grout deep cleaning
- Test a complete tile in a small inconspicuous area using Too Easy to make sure the result meets your and your client’s expectations. Once complete, inspect the tile closely for any imperfections from manufacturing, transport or tiling before quoting or starting the job.
- Remove all dust, grit and sand from the surface via a powerful dry vac. Remove any other foreign material that may cause scratching in the agitation process like grout, grout haze, paint or plaster.
- Dilute at 4:1 (4 parts water and 1 part Too Easy). That's approximately 80% water and 20% Too Easy (200ml of Too Easy per litre of ready-to-use cleaning solution). Add water to your bucket, then add Too Easy.
- Apply product liberally to the surface via a mop, brush, doodlebug, bucket or watering can.
- Agitate immediately into the surface. Choose the method of agitation that is suitable for the surface to be cleaned and the soil type. For example, floor scrubbers, doodlebugs, deck scrub brushes or high-pressure water blasters.
- Let the solution dwell on the surface for 5 to 10 minutes, then agitate again, applying more diluted product or water if required.
- Remove the slurry with a powerful wet vac.
- Rinse the surface thoroughly and remove the liquid with a powerful wet vac. Repeat steps 2-8 if required.
Floor sealer cutbacks (for water-based sealers only)
Ideal on vinyl floors. Will not strip solvent, epoxy and some other sealers.
- Dilute at 80:1 (80 parts water and 1 part Too Easy). That's approximately 99% water and 1% Too Easy (50ml of Too Easy in ½ a bucket/4 litres of water or 13ml per litre). Add water to your bucket, then add Too Easy.
- Mop the solution over a 20m² area.
- Allow the product to dwell for 5 to 10 minutes.
- Use a suitable pad (e.g. Blue or Green for cutting back) with a slow-speed scrubbing machine, focusing on any areas… for example, edges. Take care, as the floor may become slippery.
- Use a wet and dry vacuum to remove the solution from the floor. You could also mop it up, but this is not as effective.
- Repeat the process if required.
- Allow the floor to dry, then buff the floor before re-sealing.
Handy tips
- When manually filling bottles, buckets or tanks, add the water first and Too Easy last. This prevents foaming, chemical splashes and spills.
- Always test first in an inconspicuous area before using any cleaning solution. Play it safe, especially when you use a product for the first time. Some surfaces can be sensitive to moisture and particular chemical types.
Is Too Easy pet-friendly?
Yes. When used as directed, it is safe around pets and humans. When doing deep cleaning, keep pets away from the area until you have finished cleaning.
Is Too Easy septic-safe?
Yes.
Is Too Easy flammable?
No. It's a non-flammable, water-based degreaser, which makes it a safe alternative to flammable solvent-based cleaners and smelly degreasers.
What kinds of soil does Too Easy remove?
Fat, grease, soil, dirt, animal and vegetable oils, permanent markers, carbon, soot, dried blood and most industrial soils from a huge range of hard surfaces.
Will Too Easy damage painted surfaces, plastic or vinyl?
No, it's harmless to painted surfaces, plastic and vinyl when used at the correct dilution. Always test first in an inconspicuous area before using any cleaning solution.
Can I use Too Easy to remove floor sealer?
Too Easy can cut back water-based floor sealers at 80:1. It will not completely strip solvent, epoxy and some other floor sealers.
Does Too Easy work with a pressure washer?
Yes. Pressure washing is one of its uses. Dilute Too Easy for the job and follow the instructions for your equipment.
Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.
Safety Data Sheet
Wall Charts
Videos
Selection Guides
Related Articles
Calculators
