Specifications for IPA Wipes Refill - Hospital Grade Disinfectant Wet Wipes Refill Roll - Isopropyl Alcohol
Wipe away your worries.
This handy IPA wipe refill roll replacement saves throwing out your perfectly good plastic tub. It's reduce, re-use, recycle 101 :)
IPA Wipes clean and disinfect your surfaces from nasty germs and viruses. These hospital-grade bactericidal disinfectant wipes are impregnated with 70% Isopropyl Alcohol which kills 99.9% of germs. The convenient and disposable wet wipe is safe, quick and easy to use. IPA Wipes eliminate one of the most unhygienic germ-spreading cleaning tools… the reusable cloth.
IPA Wipes make your infection control plan more effective and easier to manage. There is no mixing of chemicals or bulk chemical storage required and no injuries associated with spraying liquids.
Where to use
IPA Wipes are super versatile and commonly used commercially. They are now becoming popular for home use too. They are suitable on all washable hard surfaces including… phones, mouses, keyboards, desks, door knobs/handles, handrails, stainless steel benches, trolley tops, tile surfaces, sinks, dispensers, toilet flush buttons and seats, nappy change tables, sanitary hygiene bins, bed rails, equipment surfaces and any other touch points or surfaces that may contain nasty germs!
The benefits
• Contains Isopropyl Alcohol 70% v/v.
• Kills 99.9% of germs.
• Kills Escherichia coli, pseudomonas aeruginosa, golden staph and salmonella.
• Ultra-fast ‘Critical Area’ Disinfection.
• Cleans and disinfects surfaces.
• Hospital Grade.
• Active against gram + and gram - bacteria.
• Germicidal.
• Hygienic. Quick. Disposable.
• Fast drying. No residue.
• Fragrance-free. Non-tainting.
• Perforated sheets. Easy dispensing.
• White cloths are the best to clean with. Nothing can hide on white, you can see everything!
• No mixing of chemicals or bulk chemical storage is required.
• Australian-made and owned.
How to replace a refill
1. Unscrew the wipes tub lid.
2. Remove any existing packaging or contents.
3. Open the pack just enough to pull the centre of the roll up ready to feed through the lid. Leave the refill in the package as it will extend the life of the wipes by protecting them from the air.
4. Place the replacement refill roll into the tub and feed it through the X in the tub lid.
5. Re-fit lid.
Surface Disinfecting & Cleaning
1. Open the lid. Make a small hole in the centre of the lid seal and pull the wipe from the centre of the roll through the small X.
2. Pull wipes at a 90° angle (parallel to the ground) from the container and close the lid.
3. Test on a small inconspicuous area first to ensure the suitability of the product on the surface.
4. Remove any debris or excess stain deposits.
5. Wipe & agitate the surface to be treated by hand.
6. Turn the wipe to an unused section (or use a fresh one) for a final wipe. A circular motion removes most dirt and grime fast.
7. Allow the surface to air dry for max dwell time.
8. Repeat the process if necessary.
9. Dispose of the used wipe.
Handy tips
• Keep the container closed to retain maximum performance.
• Use fresh disposable wipes. Always replace when visibly soiled or dry.
