Specifications for Bottoms Up! All-In-One Beer Line Cleaner & Sanitiser
Pour me a cold one, mate!
Cleaning and sanitising your beer lines every week ensures your beer is crisp and tasting the way it should. No one wants to be served up foul-tasting beer!
Bottoms Up! beer line cleaner and sanitiser sorts out beer stone and bacteria and any other unwanted nasties, leaving your beer reticulation systems hygienically clean and ready to serve up some frosty ones.
Where to use
Bottoms Up! is ideal for beer line cleaning of...
• Commercial draught beer systems.
• Domestic draught beer systems.
• Taps, fittings and bits and pieces.
The benefits
•
Convenient all-in-one formula.
• Clean. Sanitise. Protect.
• Concentrated. Economical.
• Easily removes heavy build-up.
• 100% cruelty-free and never tested on animals.
• Australian-made and owned.
Beer line cleaning and sanitising systems
- Follow the dosing system manufacturer’s guidelines.
- Pre-set the dosing system to automatically dispense 10 to 20ml of detergent per litre of water.
- Wear gloves and eye protection. Wearing an apron is also recommended.
- Ensure that the compressor is off and control valves are open.
- Flush beer lines with water, then clear them with CO2 gas.
- Dilute. Add 60ml of Bottoms Up! beerline cleaner and sanitiser per 5L of water (84:1 or 84 parts water and 1 part Bottoms Up!). Ensure you have enough diluted product for full circulation. For neglected lines, increase dilution to 90mL per 5L (50:1 or 50 parts water and 1 part Bottoms Up!).
- Force the solution through the lines with the CO2.
- Ensure that the lines are full of the solution by checking the solution is freely flowing through the taps (visible as a pale yellow solution).
- Leave for a minimum of 30 minutes. For best results, overnight.
- Flush lines thoroughly using at least 30L of water per tap.
Handy tips
- At the end of each day, flush lines with water to remove beer from the lines. Blow water from the lines using CO2 gas (make sure CO2 gauges are disconnected from the water line). Leave CO2 in the lines overnight. Before the commencement of trading, flush at least 10L of water through the lines.
What is Bottoms Up! used for?
Cleaning and sanitising draught beer lines, taps and fittings in commercial and domestic beer systems. It sorts out beer stone and bacteria and any other unwanted nasties.
How often should I clean my beer lines?
Cleaning and sanitising your beer lines every week ensures your beer is crisp and tasting the way it should.
How much Bottoms Up do I use?
- Standard clean: add 60ml per 5L of water.
- Neglected lines: add 90ml per 5L of water.
Make enough solution for full circulation.
Can I use an automatic dosing system?
Yes. Follow the dosing system manufacturer's guidelines. Pre-set the system to dispense 10 to 20ml of detergent per litre of water.
How long do I leave Bottoms Up in the lines?
A minimum of 30 minutes. For best results, leave it overnight.
How do I know the lines are full?
Check that the solution is flowing freely through the taps. It shows as a pale yellow solution.
How do I rinse the lines?
Flush the lines thoroughly with at least 30L of water per tap.
What PPE should I wear?
Gloves and eye protection. We also recommend an apron.
What do I do at the end of each day?
- Flush the lines with water to remove beer.
- Clear the water from the lines with CO2 (make sure the CO2 gauges are disconnected from the water line).
- Leave CO2 in the lines overnight.
- Before trading starts, flush at least 10L of water through the lines.
Can I use Bottoms Up on a home draught system?
Yes. It's ideal for domestic draught beer systems too.
Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.
Safety Data Sheet
Wall Chart
Related Articles
Calculators