Specifications for Rapid Removal - Professional Graffiti Remover for Paint & Ink
I eat graffiti for breakfast.
Rapid Removal is a super-powered blend of low-odour solvents combined with a unique activating agent which quickly and easily removes paint and ink-based graffiti including aerosol paint, felt tip permanent marker pens, ballpoint pens and more. The formula is slightly thickened to give you the cling factor on vertical surfaces allowing the chemical to work on the graffiti more effectively.
Where to use
Rapid Removal is designed for removing graffiti from indoor and outdoor surfaces including... natural stone, brickwork, concrete, glass, fibreglass, various types of metals and timber.
Where not to use
Rapid Removal is not suitable for use on aluminium, plastic, laminate, vinyl, linoleum, asphalt tile, rubber tile, floor sealer and painted surfaces.
The benefits
• One product does all. Works on almost all surfaces and graffiti types.
• Low odour. No unpleasant solvent fumes during and after treatment.
• Fast acting. Removes graffiti in 2-3 minutes.
• Free rinsing. Requires high-pressure water rinse only.
• Australian-made and owned.
Rapid Removal is ready to use. Do not dilute.
Graffiti removal
- Your safety comes first. Wear personal protection equipment (e.g. gloves, goggles, overalls, boots)
- Always test first in an inconspicuous area before use.
- Use neat. The product is ready to use.
- Apply to a dry surface using a brush. Scrub it into the surface to assist penetration and cleaning performance.
- Allow 2 to 5 minutes of dwell time on the surface. Do not allow it to dry.
- Agitate with a stiff brush or scourer if necessary. For glass and sensitive surfaces, use a soft brush or non-scratch scourer that is suitable for the surface.
- For stubborn graffiti, repeat steps 4 to 6 another 1 or 2 times, or until you can see the graffiti is completely removed.
- High-pressure rinse off with water (a low-pressure hose can also be used along with a brush, scourer or broom). Ensure runoff is not left to dry on other surfaces as staining may occur. Ensure drains are protected and excess runoff is disposed of correctly in accordance with local regulations.
- To ensure no residues remain on the surface you’ve just treated, clean the area with a neutral cleaner like Bobby Dazzler or Bonza as a final step.
Handy tips
- Get onto graffiti when it's fresh. The sooner you can get onto it, the easier and faster it is to remove it.
- Rapid Removal is not suitable for painted surfaces because it is a paint remover. It will remove the graffiti but will also remove some of the paint and so re-painting may be necessary and is normal practice when doing graffiti removal from painted surfaces.
- Always test first in an inconspicuous area before using any cleaning solution. Play it safe, especially when you use a product for the first time. Some surfaces can be sensitive to moisture and particular chemical types.
- For severe or difficult graffiti that is not completely removed repeat the process and extend the dwell time. There are some circumstances where re-painting is required.
- Coverage rates will vary depending on the texture and porosity of the surface as well as your application method but on average 1 litre of Rapid Removal will clean a 15m² to 20m² area of medium-density graffiti.
- Always rinse the surface thoroughly with water after use.
Do I need to mix Rapid Removal?
No. It's ready to use, so don't dilute it. Apply it neat to a dry surface with a brush.
How long do I leave Rapid Removal on?
Allow 2 to 5 minutes of dwell time, and don't let it dry. Agitate with a brush or scourer if needed. For glass and sensitive surfaces, use a soft brush or non-scratch scourer.
What if the graffiti doesn't come off?
For stubborn graffiti, repeat the apply, dwell and agitate steps another 1 or 2 times. For severe graffiti, repeat the process and extend the dwell time. Sometimes re-painting is required.
How do I rinse Rapid Removal off?
Yes, preferably with a high-pressure water rinse. A low-pressure hose can also be used with a brush, scourer or broom. Don't let runoff dry on other surfaces, as staining may occur. Protect drains and dispose of runoff in accordance with local regulations.
What should I do after rinsing?
Clean the area with a neutral cleaner like Bobby Dazzler or Bonza as a final step, so no residues remain.
How far does Rapid Removal go?
On average, 1 litre cleans a 15 to 20m² area of medium-density graffiti. Coverage varies with the texture and porosity of the surface and your application method.
Will it strip or dull a painted surface?
Yes. It's a paint remover, so it removes graffiti and some of the paint too. Re-painting may be necessary and is normal practice.
What surfaces shouldn't I use Rapid Removal on?
Aluminium, plastic, laminate, vinyl, linoleum, asphalt tile, rubber tile, floor sealer and painted surfaces.
What protective gear do I need?
Wear personal protection equipment such as gloves, goggles, overalls and boots. This product is very heavy-duty and powerful.
Is Rapid Removal pet-friendly?
No. Do not allow pets near the area being treated until you are finished and the treated surfaces are completely rinsed and dry.
Is Rapid Removal septic-safe?
No. This product is very heavy duty. It is generally used when all else fails :)
Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.
Safety Data Sheet
Wall Charts
Related Articles
Calculators
