Descale Clean & Clear - Descaler & Limescale Remover

Descaling domestic dishwashers

1. Empty all items from the dishwasher and clean all filters.
2. Add 50g of Descale Clean & Clear to the detergent hopper and 10g directly to the inside of the machine, then run the normal wash cycle.
3. Check the doors and hinges for any scale or grime build-up and wipe clean.

Descaling commercial dishwashers

1. Switch off the detergent dispenser if fitted to the machine.
2. Drain and refill the machine with clean hot water.
3. Add approximately 1/2 cup (100g) of Descale Clean & Clear to the wash water tank. 
4. Run the dishwasher on the manual cycle for several minutes. Allow to stand for 5 minutes. Run the machine again for two minutes.
5. Run a rinse cycle, then drain water from the machine.
6. Scrape or brush the walls of the wash tank with a stiff brush to remove loose scale. Rinse to remove loose scale.
7. Switch the detergent dispenser back on and refill the machine with fresh water and detergent to commence dishwashing.

Descaling of kettles, jugs and urns

• Ensure that no one drinks from the appliance during this cleaning and descaling process.
• Not suitable for enamel, aluminium or Pyrex glass kettles.

1. For a kettle or jug dissolve 50g of Descale Clean & Clear in one litre of warm water. For an urn use 100g to 200g depending on it's size and how far you will be filling it.
2. Add the mixed solution to the kettle or jug ensuring the element and surfaces where scale is present are completely covered. Add more water if required.
3. Bring the kettle or jug to a boil and then leave for 5 to 10 minutes.
4. Empty the solution from the appliance and rinse thoroughly with clean water.

Descaling washing machine

• Ensure no items (eg. clothing) are in the washing machine when the descaling procedure takes place.
• For best results use warm to hot water.

1. Allow the machine to fill with water to a full load level.
2. Then add 200g of Descale Clean & Clean to the water in the washing machine. Tun the normal wash and rinse cycle for a full load.
3. Check the doors and hinges for any scale or grime build-up and wipe clean.
4. Repeat the process if necessary.

Descaling showerheads

1. Remove the showerhead and place it in a bucket.
2. Add 50g of Descale Clean & Clear per 1 litre of hot water and pour over the showerhead until it is completely covered.
3. Allow to soak for up to 15 minutes.
4. Discard the solution and then rinse with lots of clean water.
5. Refit the showerhead.

Descaling coffee machines

Follow the instructions provided by the manufacturer.

Handy hints

• Always test first in an inconspicuous area before using any cleaning solution. Play it safe, especially when you use a product for the first time. Better to be safe than sorry. Some surfaces can be sensitive to moisture and particular chemical types.
• Regular monthly descaling is recommended for optimum results. Descaling once a year should be considered an absolute minimum and for many applications, a yearly descale would not be enough to ensure efficiency, prolonged appliance/equipment life and the maximum benefits.
• Use as high a temperature water as you can safely handle. The hotter the water, the better the results.
  

What can I descale with Descale Clean & Clear?

Dishwashers (commercial and domestic), washing machines, urns, bain-maries, kettles and jugs, irons, showerheads, coffee machines and hotel room spa baths.

How often should I descale?

Regular monthly descaling is recommended for optimum results. Once a year is an absolute minimum, and for many applications a yearly descale isn't enough to keep equipment efficient.

Is Descale Clean & Clear safe for plastic and steel appliances?

Yes. It's safe for descaling plastic and steel appliances. It's not suitable for enamel, aluminium or Pyrex glass kettles.

How much do I use for a kettle or jug?

1. Dissolve 50g in one litre of warm water.
2. Add it to the kettle or jug so the element and scaled surfaces are covered.
3. Bring to the boil and leave for 5 to 10 minutes.
4. Rinse thoroughly.
5. For an urn use 100g to 200g depending on its size.

How do I descale a showerhead?

1. Remove the showerhead and put it in a bucket.
2. Add 50g per 1 litre of hot water.
3. Soak for up to 15 minutes.
4. Rinse with lots of clean water and refit.

Can I use Descale Clean & Clear on a coffee machine?

Yes, it's a listed use. Follow the instructions provided by the machine manufacturer.

Does water temperature matter?

Yes. Use as high a temperature water as you can safely handle - the hotter the water, the better the results.

Still not sure which XO2 product is right for your site? Give us a call on 1300 123 499. No hard sell, just help.

Safety Data Sheet

• Safety Data Sheet (SDS): Descale Clean & Clear

Wall Charts

• XO2 Chemical Handling Guide - A4 Wall Chart

Related Articles

• What is the difference between cleaning, sanitising and disinfecting surfaces?
• 21 Cleaning Chemical Handling Guidelines For Your Workplace
• The Workplace Cleaning and Hygiene Procedure Checklist

Calculators

• The Facility Cleaning + Hygiene Score