Specifications for Virafoam - Manual Push Foaming Hand Sanitiser Dispenser - High Capacity, Low Servicing
The Virafoam manual push foaming hand sanitiser dispenser and refill combination leads the industry with higher capacity, lower servicing requirements, less waste and less mess. Each refill gives you a huge 2500 uses and the dispenser is so durable that even a fly kick doesn't phase it :) It's designed to reduce your costs and deliver exceptional hand hygiene with far less effort from your staff.
The benefits
• Suits the XO2® Virafoam Zero & Virafoam Refill pouches.
• Almost bulletproof! Super heavy duty and reliable design can cop some serious abuse.
• Generous (0.4ml) amount of soap dispensed per shot.
• Less servicing. Less run-outs. Lower cost per use.
• Sealed hygienic vacuum refill pouch with foaming pump
• Pump is replaced every refill. Eliminates drips and pump issues.
• High capacity refill that controls usage.
• Each refill gives you 2500 uses. That's huge!
• 100% virgin ABS Engineering plastic.
• Compact footprint design BUT super high capacity.
• Keyless tamper-proof locking system. No keys to lose or worry about
• Water / Splash proof. Perfect for wet areas and outdoor applications.
• Easy to instal. Flat back with large surface area for tape and adhesive mounting options.
• Handy 'How to change a refill' instructions on the inside of the dispenser :)
• Dispenser footprint: 12.5cm wide x 9.5cmdeep x 24cm height.
• Refills not included.
How to sanitise your hands
1. Apply a generous amount of sanitiser in a cupped hand.
2. Rub hands palm to palm.
3. Rub with right palm over left (back of) hand with interlaced fingers and vice versa.
4. Rub palm to palm with fingers interlaced.
5. Rub the back of fingers in opposing palms with fingers interlocked.
6. Do some rotational rubbing of the left thumb clasped in the right hand and vice versa
7. Do more rotational rubbing, backwards and forwards with clasped fingers of the right hand in the left hand and vice versa.
8. Once dry you are done and your hands are sanitised. There is no rinsing necessary.
How to change a refill pouch
1. Open the dispenser by pulling the front cover DOWN and then OUT.
2. Remove the empty refill pouch.
3. Insert a new refill pouch with the label facing OUT and the pump nozzle facing DOWN.
4. Line up the pump nozzle between the guide forks at the bottom of the dispenser. Push the nozzle straight back into the dispenser. It will click into place.
5. Close the dispenser cover.
6. Test the operation of the dispenser to ensure the soap is pumping properly.
